How can JIMO help?
Highlights
Most searched
Selecione uma região / Seleccione una región
Selecione / Select / Seleccione
Satin finish with high durability, recommended to protect and beautify wood surfaces in indoor and outdoor environments, such as decks, doors, windows, pergolas, gates, frames, paneling, ceilings, prefabricated houses, furniture, garden furniture, and decorative wood in general.
JIMO Protecolor protects against UV rays, increasing the durability of the wood.
Low odor
Prevents mold and fungi
Water repellent
Ultra-fast drying
Satin finish to protect and enhance indoor and outdoor wood.
Protection and durability for decks, doors, frames, garden furniture, and other wooden structures.
Easy application and maintenance: does not crack, peel, or blister, and resists sun, rain, and sea air.
Ideal for decoration and protection, with a satin finish that enhances the natural beauty of wood.
Ready-to-use product. Application should preferably be done with a Stain brush, with two coats recommended for indoor use and three to four coats for outdoor use. Apply generous brush strokes, without leaving excess, following the grain from end to end, keeping the piece always wet to avoid overlap marks.
It is recommended to apply at room temperature, between 10 and 35°C, and with relative humidity between 40 and 80%. Avoid applying on days with a chance of rain or on hot wood surfaces. Stir the product well before and during application. For decks, it is recommended to apply the product on all six faces of the wood. For a less rough, more uniform surface and a more refined finish, it is advisable to lightly sand between the first and second coat, following the wood grain, using sandpaper with grit 280 to 320. The approximate drying time to the touch is 30 minutes, and between coats, three hours. Full curing occurs in three days.
Mix the product well using a spatula; do not shake and do not dilute, as it is ready to use.
Two coats for indoor use and three to four coats for outdoor use.
Approximate coverage of 20 to 30 m²/l, depending on the density/hardness of each wood.
Approximately 30 minutes to the touch, 3 hours between coats, and full curing occurs in 3 days.
High-durability finish that beautifies surfaces and protects wood against weathering.
Yes, but due to its water-based technology, it is significantly minimized, leaving no odor in the environment after drying.
EAN 7896027087895 – Incolor
EAN 7896027087031 – Castanho
EAN 7896027087048 – Canela
EAN 7896027087055 – Mogno
EAN 7896027087062 – Imbuia
EAN 7896027087901 – Cumaru
EAN 7896027087079 – Ipê
EAN 7896027087932 – Nogueira
EAN 7896027087604 – Preto Puro
EAN 7896027087673 – Castanho Sólido
EAN 7896027087680 – Imbuia Sólido
EAN 7896027087697 – Ipê Sólido
3209.10.10
EAN 7896027087871 – Incolor
EAN 7896027087086 – Castanho
EAN 7896027087093 – Canela
EAN 7896027087109 – Mogno
EAN 7896027087116 – Imbuia
EAN 7896027087918 – Cumaru
EAN 7896027087123 – Ipê
EAN 7896027087949 – Nogueira
EAN 7896027087529 – Preto Puro
EAN 7896027087642 – Castanho Sólido
EAN 7896027087659 – Imbuia Sólido
EAN 7896027087666 – Ipê Sólido
3209.10.10
EAN 7896027087833 – Incolor
EAN 7896027087130 – Castanho
EAN 7896027087147 – Canela
EAN 7896027087154 – Mogno
EAN 7896027087161 – Inbuia
EAN 7896027087925 – Cumaru
EAN 7896027087178 – Ipê
EAN 7896027087956 – Nogueira
EAN 7896027087536 – Preto Puro
3209.10.10
Download and check the available digital content
Discover our product lines designed with quality and innovation for you and your family.
Frequently asked questions about procedures in cases of poisoning
Send a message with suggestions, complaints, or general requests
Send a message if you have any business questions